Hessdalen je malé údolí v centrální části Norska. Na konci let 1981 až 1984 byli obyvatelé údolí znepokojeni a znepokojeni podivnými, >>>
Číst dálŠtítek: ufos
🔧✨ Crafting IoT lights using Wemos D1 Mini and LED strips. 💡
Got options with and without temp sensors. 🌡️
The secret to holding it all together? Our trusty glue gun, of course! 😆
This smart light connects to Home Assistant via ESPHome, making our home just a bit smarter. 🏠💡
#DIYElectronics #SmartHomeDIY #WemosD1Mini #IoTProject #3DPrintingAddict #LEDLights #ESPHome #HomeAutomation #MakerGonnaMAKE #TechDIY #CreativeCoding #MakerLife
1 dnem ago
Parts are printed 🖨️, components prepared. ⚙️
#DIYElectronics #WemosProject #LEDCreations #MakerSpace #TechDIY #ArduinoProjects #IoTMaker #CreativeTech #ElectronicsCraft #3DPrintedGadgets #WemosD1 #LEDLighting #MakerCommunity #TechEnthusiast
2 dny ago
💡 An idea came to my mind. 💭
#DIYElectronics #SmartHome #WemosD1Mini #3DPrinting #HomeAssistant #IoT #MakerCommunity #TechDIY
4 dny ago
📡🛰️ STEM project established contact with the ISS 🚀
Tech specs:
Altitude: 400 km above Earth 🌎
Satellite speed: 27,000 km/h 💨
Doppler effect compensation: Two-way ↔️
#STEM #NASA #ESA #HamRadio #AmateurRadio #SpaceCommunication #ISS #SatelliteComms #StudentProject #ScienceEducation
5 dny ago
"SSTV image from the ISS! 🛰️📡 Russian service module beaming experimental broadcasts. Tech specs: PD120 protocol, tuned to 145.800MHz.🌎✨"
#ISS #SSTV #AmateurRadio #SpaceCommunication #HamRadio #SatelliteImaging #RussianSpaceStation #SpaceTech #OrbitalTransmissions #RadioEnthusiast #SpaceExploration #DIYSpace #SciComm #STEMlife
6 dny ago
🚀 When crafting a tool that demands precision, always kick things off with calibration! 💯
#3DPrinting #PrecisionMatters #MakerLife #CalibrationIsKey #DIYTools
7 dny ago
🔋 Tuya Sensor Update! 💡
Successfully disassembled a Tuya temperature sensor and gave it a power boost! Swapped out the standard AAA batteries for a beastly 18650 battery.
First test run looking promising - no smoke and everything's fully operational! 🙌
Keeping it running for a few days for the final verdict. Stay tuned for updates! ⚡
#SmartHome #DIY #TechMod #Batteries18650 #IoTHacks #MakerCommunity #ElectronicsDIY #SustainableTech #PowerUpgrade #TuyaMod
1 týdnem ago
🔧 Time to Resurrect This DIY Smart Garage Project! 🚗✨
Finally dusting off this abandoned project - a smart signal light for our garage door using an ESP8266 and a WS2812B LED ring! 💡
To tackle the LED strip's power consumption, I added a relay for better efficiency. No more excuses - it's time to bring this project back to life! 🔌💪
#DIY #SmartHome #Arduino #ESP8266 #MakerCommunity #IoT #TechProject #WorkInProgress #ElectronicProjects #HomeAutomation
Who else has unfinished projects waiting to be completed? Drop a 🙋♂️ in the comments!
1 týdnem ago
We’re about to pull off a tiny hack with a Tuya device.
😉 If you’ve been keeping up with us, you probably already know what's going down.
🔧 Let's just say, my forgotten voltage stabilizer is doing its job! ⚡
#SmartHomeMod #TuyaHack #TechDIY #IoTHacking #SmartDevices #TechTinkering #DIYProject #MakerCommunity #HomeLab #TechLife #Gadgets #ElectronicsDIY #Innovation #HackLife #TechModding
1 týdnem ago
MOON CENTEST
